If there is a high temperature difference between the inlet and outlet water, then a large external tank will be used to store cold water. In this case, the cooling water will not be directly from the cooler application. Deep into the outside of the tank is a “temperature buffer sort behavior”. Cold water tanks are much larger than internal ones. The cold water goes to the application of external fuel tank and come back as hot water. It can be traced back to external fuel tanks, not to industrial chillers.

Industrielle Kältemaschinen recycle is at constant temperature and pressure to increase stability and repeatability of water cooling equipment and instrument cleaners and conditions or clean water. Angle use and back of application of cooling of water flow.

An uncommon open-loop controlled industrial refrigerator is an open tank or oil pan at which the temperature of the liquid is continuously circulating. The liquid comes from the tank and goes back to the tank through the pump crew. It is an adjustable constant temperature sensory liquid temperature and circulation cooler to maintain constant temperature tank.

One of the new developments in industrial chillers is air cooling, not the use of cooling water. In this case, the condenser of industrial water chiller does not have cooling and hot air refrigerant, but uses cooling water. This development allows for more than 15% reduction in energy demand in coolers due to the small area of surface water. In addition, the noise level can be greatly reduced with the permission of the fans.

Most industrial chillers use cooling media for refrigeration, but some simple technologies that rely on air or water include cooling coil flow that regulates temperature. Water is a commonly used coolant in refrigeration process, although cooling mixtures (mainly with coolant additives to enhance cooling water) are often used.