Anleitung zur Auswahl eines Temperaturregelsystems für Halbleiterkühlgeräte
The choice of semiconductor refrigeration temperature control system should be based on the cold load and what to use for consideration. For refrigeration systems with long operating conditions with low load operation, it is suitable to select multi-head piston compressor unit or screw compressor unit for easy conditioning and energy saving. This is the dual-head semiconductor refrigeration temperature control system that we often say. With the change of load, the semiconductor refrigeration temperature control system group automatically determines the number of power-on, ensuring that the open compressor is in working state, thereby effectively saving energy.
When selecting a semiconductor refrigeration temperature control system, the unit with a higher coefficient of performance value is preferred. According to previous statistics, the normal semiconductor refrigeration temperature control system group has a running time of less than 1/4 of the total running time. Therefore, when selecting a semiconductor refrigeration temperature control system group, the model of the semiconductor refrigeration temperature control system with a relatively flat efficiency curve should be given priority. At the same time, the adjustment range of the semiconductor refrigeration temperature control system group load should be considered in the design selection. The semiconductor refrigeration temperature control system group has excellent partial load performance, and the semiconductor refrigeration temperature control system can be selected according to the actual situation of the factory.

When selecting a semiconductor refrigeration temperature control system, attention should be paid to the normal working range of this type of semiconductor refrigeration temperature control system, mainly because the current limit of the motor is the current value of the shaft power under surface conditions.
The choice of semiconductor refrigeration temperature control system is nothing but performance, brand and price. When choosing the appropriate semiconductor refrigeration temperature control system, try to choose high-performance semiconductor refrigeration temperature control system, so that the operation is more stable.
Verwandte Empfehlungen
-
What is the temperature control of the reactor?
1143The reactor cooling system is one of the common equipment in the chemical industry. It can not only heat but also refrigerate to meet the needs of heating and cooling in the reaction process. There are usually three ways to control the temperatu...
Details anzeigen -
Precautions for the replacement of refrigerating oil in the cooling system of the vehicle charger
1014The cooling system of the on-board charger should pay attention to the condition of the refrigerating oil during the operation. After the compressor is started, carefully observe the changes in the oil temperature and oil pressure. If the oil chan...
Details anzeigen -
What Are The Characteristics Of Refrigeration Of Industrial Chillers?
1153If there is a high temperature difference between the inlet and outlet water, then a large external tank will be used to store cold water. In this case, the cooling water will not be directly from the cooler application. Deep into the outside of t...
Details anzeigen -
What should I pay attention to when using the reactor for chilling and cooling?
1096When using the reactor chilling and cooling and cooling device, users need to pay attention to their refrigeration and heating operations. Pay attention to the operation within a reasonable temperature range to avoid excessive temperature and pres...
Details anzeigen