Buttons and functions

---

Control Picture

Click Control Picture to enter the device operation status monitoring interface. The middle area of this page shows the current actual temperature, pressure and set temperature and pressure. The specific items will vary depending on the function of the device you purchased.
 
If you are using a KRY series chiller that can control flow, there will be additional additional flow parameters will also be displayed. On the left side of the interface is the module operation status indicator, gray means it is not turned on, and green means it is running. Below are the common function buttons. The top information bar and the bottom status bar are consistent with the homepage.

Program Settings

Multi-stage operation program settings are performed on the Program Settings page. You can set the temperature, pressure and flow for multiple time periods here. After saving the settings, the chiller will automatically switch the operating state at the corresponding time node, and no manual operation is required.

User Login

In the User Login interface, you can log in with a unique account and password. Only after logging in can you use advanced functions. This function is to distinguish users with different permissions to prevent over-level misoperation and data leakage.

Parameter Setting

In this interface, you can set some parameters of the device operation, such as temperature and pressure alarm thresholds, temperature control response speed, etc.

Kontakt

This button is for your convenience to contact us when you encounter problems. The interface introduces how to quickly obtain after-sales service and technical support.

Alarm Log

LNEYA chillers have automatic diagnosis and fault alarm functions. You can query the current alarm information and historical alarm information in Alarm Log. Because there are fault codes, error descriptions and alarm times, you can quickly diagnose the issue based on the alarm codes and descriptions.

Curve Display

Click Curve Display to enter the data curve page, which is a tool for analyzing the trend of temperature, pressure, flow and other parameters over time. The horizontal axis is the time axis, and you can scroll back and forth to view historical data. The vertical axis is the parameter axis, and you can switch different parameter curves and scroll up and down to view them. When you click a point on the curve, the upper left corner of the curve chart will display setpoint, outlet temp, inlet temp, delta T and other data in a table. If you want to record data at a certain point in time, it also supports screenshots.

User Management

If you have advanced management permissions, you can manage the grouping and permissions of user accounts in User Management, and add and delete users. This function is very important for strengthening data security.