Several Common Troubleshooting Methods for Ultra-low Temperature Freezer in Laboratories
Although the refrigeration system and control circuit of ultra low temperature freezer in laboratory are complex, the common faults are mainly circulating system and circuit part.
Following are several common faults of ultra-low temperature refrigerators and their troubleshooting methods:
1. After power supply is switched on, the air switch of the main power supply is automatically disconnected.
Elimination method: Check whether the compressor of refrigeration system is damaged or not, and replace the parts if damaged. After replacing the fittings, turn on the machine to check whether it is normal. The fault is usually caused by unstable power supply, because the * stage starts first, so the damage is usually in stage. In this case, as long as the delay regulated power supply is installed, the fault will not occur again.
2. Stop working before the temperature in the box reaches the set temperature.
Exclusion: Although the temperature in the box has not reached the set temperature, the panel display temperature has reached the set temperature. This is due to the damage of the thermistor which detects the temperature and the need to replace the parts. If there is no original accessories, a set of temperature control system can be re-installed to eliminate the failure.
3. Poor refrigeration effect may be refrigerant leakage
4. If the ultra-low temperature refrigerator does not start in winter, it may be that the thermostat regulation value is too small.
We are a ultra low temperature freezer manufacturer. Welcome to choose our products.
Verwandte Empfehlungen
-
Auswahl und Einbau des Expansionsventils für Rückkühler
1587Die Auswahl des Expansionsventils spielt eine wichtige Rolle für die Leistung des Kühlsystems mit Rückkühler. Die richtige Wahl des Expansionsventils maximiert die Nutzung des...
Details anzeigen -
Das Prinzip und die Schwierigkeiten der Temperaturregelung von Heiz- und Kühlkreislaufgeräten
1326Heating and refrigeration cycle equipment is equipment for fluid refrigeration, heating and temperature control for reactors, integrated reactors, reaction tanks, etc. At present, there are more manufacturers on the market. When the reactor or rea...
Details anzeigen -
How to choose the cooling and heating temperature control system?
1723The price of the refrigeration heating temperature control system is not the main factor. The main purpose is to implement the temperature control technology through the temperature control function. However, it is not the temperature control syst...
Details anzeigen -
Das Kälteprinzip des Glykol-Kältesystems
1668Manchmal muss der Kälteträger eine Temperatur unter 0 C erreichen. Wenn das Eis den Koch trägt, friert er ein, so dass die Zugabe von Gefrierschutzflüssigkeit das Einfrieren verhindern kann, und Glykol kann das Einfrieren verhindern. glycol chillers ,
Details anzeigen
LNEYA Industriekühler Hersteller Lieferant










