Ultra Low Temp Chiller Compressor Allgemeine Schutzanweisungen
Die ultra low temp chiller compressor is a relatively important part of all its components. In the course of operation, certain protective devices are needed to help the compressor operate safely. What specific protection? Let’s take a look!
The most common protection for ultra low temp chiller compressors is the suction and exhaust pressure protection. Basically, each ultra low temp chiller will be equipped with this protection device. The main function of the ultra-low temperature chiller compressor is to take charge of the intake and exhaust, and the working chamber is used to perform compression between the intake and exhaust. The pressure molding of the ultra low temp chiller is installed to prevent the intake and exhaust pressure from being caused. If there is a problem with the suction and exhaust pressure, subsequent operations will not function properly, and ultra low temp chillers will not cool properly.
Then there is the oil pressure difference protection device for the ultra low temp chiller compressor. Some manufacturers install the oil separator when producing the ultra low temp chiller. Therefore, the ultra low temp chiller compressor must have a hydraulic pressure difference protection device. Why? Because the frozen lubricating oil is critical to the compressor of the ultra low temp chiller, and if the frozen lubricating oil is not normal, the compressor will also be abnormal.
In addition to the above-mentioned common faults, other common exhaust temperature protection, which, has the same effect asthe suction and exhaust pressure protection of the ultra low temp chiller compressor, because the inhalation temperature is often not problematic, problems lie in the exhaust temperature. Most of the time, if the exhaust pressure is high, the exhaust temperature will be high. In addition to installing the exhaust pressure protection device, installing the compressor exhaust temperature protection device is actually a two-pronged method. After all, the compressor is more important core components, and there must be no problems.
Of course, the protection configuration of each ultra low temp chiller is also different. Wuxi Guanya also specially sets safety protection devices to protect everyone’s environment.
Verwandte Empfehlungen
-
Introduction of distillation principle and temperature cycle control device
945Distillation is a common method for purifying liquid substances and separating mixtures. The boiling point of the compound can also be measured by distillation, so it also has a certain significance for the identification of pure liquid organic co...
Details anzeigen -
Won the second place in the 2022
1515On November 18, 2022, it was sponsored by the Jiangsu Provincial Association for Science and Technology, the Provincial Taiwan Affairs Office, the Provincial Department of Industry and Information Technology, the Provincial Department of Agricultu...
Details anzeigen -
Principle analysis of operation of refrigeration heating circulator
1120With the continuous development of technology, more and more refrigeration equipment has appeared in our lives, such as: refrigeration and heating circulators, in fact, they are not ordinary, are remarkable refrigeration equipment. The refrigerati...
Details anzeigen -
Cooling fin cleaning instructions for 20 freezers
1159As one of the main accessories of the 20-piece freezer, the heat-dissipating fins are very important. Therefore, the cleaning of the heat-dissipating fins is also very important. How to clean them? The fins of the freezer are also called finned co...
Details anzeigen