News

What are the main advantages of oil coolers for the biopharmaceutical industry?
In the refrigeration system of the oil cooler in the biopharmaceutical industry, the compressor, the evaporator and the condenser are the indispensable parts of the refrigeration system. The condenser is the equipment that emits heat, which combines the heat absorbed in the evaporator with the compressor The heat converted by the work is transferred to the cooling medium to take away together, which is responsible for the important components of the refrigeration system. If the function decre...
Details anzeigen
How to repair the compressor failure in the industrial glycol temperature cycle machine
The industrial glycol temperature machine performs refrigeration and heating reactions under the required process conditions, and the compressor is used as its core accessory. If a fault occurs, the operator should pay attention to summarizing and analyzing the problem. 1. The industrial glycol temperature machine is divided into two parts: heating part and cooling part, which are widely used in chemical industry, reaction kettle and other industries. It can realize mutual switching, speed ...
Details anzeigen
Introduction to the quality and configuration of industrial refrigeration and heating circulators
With the development and progress of society, industrial refrigeration and heating circulators are used more in the industry, and the technological level is becoming more and more complex. So, what should users pay attention to after purchasing this equipment? 1. In order to consume electricity, many companies will cut off the power after the experiment. According to the technical staff, we explained that if the industrial refrigeration and heating circulator is powered off in winter, the inn...
Details anzeigen
Misunderstandings in the use of vacuum pump temperature control system
When using the vacuum pump temperature control system, only the correct operation method can ensure the normal and stable operation of the equipment. If there are many wrong operation behaviors, it will directly affect the normal use of the equipment, and even affect the cooling performance. 1. When starting up, adjust the pressure drop of the inlet and outlet water higher than the operating parameters. When the pressure drop is too high, open the inlet and outlet valves of the evaporator of...
Details anzeigen
Installation method of heating and cooling temperature control system for automobile motor
In chemical and pharmaceutical, chemical laboratories, pilot plants and other industrial processes, the heating and cooling temperature control system is the most used equipment for temperature control in chemical manufacturing, so a highly dynamic temperature control system is required. When controlling the reactor temperature, exothermic and endothermic reactions must be compensated for with high speed and reliability. Selection must take into account a variety of influences and conditions....
Details anzeigen
What are the requirements for the cooling and heating temperature control equipment of the 500-liter
The 500-liter reaction kettle cooling and heating temperature control equipment is a dynamic temperature control system, a fully closed circulation pipeline, which can be automatically heated or cooled according to the process requirements. 1. A series of exothermic and endothermic reactions will occur during the polymerization reaction of the 500-liter reactor with cooling, heating and temperature-controlling equipment. 2. It can control one or more reactors at the same time. It is a large s...
Details anzeigenHigh-low temperature control system with different configurations of high-pressure reactors
Different configurations of high pressure reactors, the quality of products brought by different manufacturers is not the same, but the points of attention are the same, you need to pay attention to it. 1. To be used at the designated location and follow the instructions for use. Check the test pressure, operating pressure, operating temperature and other conditions engraved on the main container, and use it within the allowable range of conditions. 2. The high-pressure reactor is a precision...
Details anzeigen
Analysis of the work and industry application of the chiller
Although there are many different types of chillers, most use the same cooling principle. An important part of the process is the coolant or refrigerant, which holds more heat than water and helps maintain an efficient cooling process. Heat is removed from the coolant and released into the air. The concept of a cooler is based on the principle that cooling involves removing heat from a process and releasing it into the air. All chillers have condensers, compressors, expansion valves and evapo...
Details anzeigen
Where can industrial heating circulators be useful?
The industrial heating circulator can provide a circulation device of cold source and heat source, and has a wide working range. It is used in the pharmaceutical, chemical, biological and other industries to provide heat and cold sources for reactors, tanks, etc., and can also be used for heating and cooling of other equipment. 1. Due to the heating and cooling effect of the industrial heating circulator, the material temperature can be kept constant (heating and cooling) during the producti...
Details anzeigen
About the components of the reactor chiller refrigeration heating circulator
The reactor chiller refrigeration and heating circulator is used to control the heater and cooler, adjust the temperature, and maintain the stable temperature of the material. Through the circulating medium, the temperature of the material can be quickly controlled to further improve the efficiency of the product, so that it can be transported to the cooling equipment normally. Refrigerant, and can make the refrigerant form a continuous circulation loop in the system, so as to reduce the temp...
Details anzeigen